News
B&C DCX-464-16 with ES-600 Biradial Horn
This blog post features the new B&C DCX-464-16 1.4" Coaxial Compression Driver. I will show some objective test data and provide feedback on my subjective listening impressions. For this test...
B&C DCX-464-16 with ES-600 Biradial Horn
This blog post features the new B&C DCX-464-16 1.4" Coaxial Compression Driver. I will show some objective test data and provide feedback on my subjective listening impressions. For this test...
Purifi PTT6.5 Test Results in 1198 Transmission...
This blog post features the objective test data for the Purifi PTT6.5 woofer mounted in my own transmission line enclosure design. 1198 Floor Standing Transmission Line Frequency Response Measurements ...
Purifi PTT6.5 Test Results in 1198 Transmission...
This blog post features the objective test data for the Purifi PTT6.5 woofer mounted in my own transmission line enclosure design. 1198 Floor Standing Transmission Line Frequency Response Measurements ...
Revised Distortion Tests For RAAL 70-20XR on 11...
Please note the PDF version of these test results can be downloaded Here. From further investigation it was discovered that a potential cause of the low output of the RAAL...
Revised Distortion Tests For RAAL 70-20XR on 11...
Please note the PDF version of these test results can be downloaded Here. From further investigation it was discovered that a potential cause of the low output of the RAAL...
1198 Floor Standing using Purifi PTT6.5W04
Continuing on from the 1159 stand mount speaker is a new floor standing design. The 1198 floor standing speaker has the following changes compared to the 1159 stand mount... Purifi...
1198 Floor Standing using Purifi PTT6.5W04
Continuing on from the 1159 stand mount speaker is a new floor standing design. The 1198 floor standing speaker has the following changes compared to the 1159 stand mount... Purifi...
Horn No. 1155 for RAAL 70-20XR Pure Ribbon Tweeter
Horn No.1155 using ES-Biradial Geometry for RAAL Ribbon Tweeter This blog post features a custom horn that I designed and built for a customer that uses the RAAL...
Horn No. 1155 for RAAL 70-20XR Pure Ribbon Tweeter
Horn No.1155 using ES-Biradial Geometry for RAAL Ribbon Tweeter This blog post features a custom horn that I designed and built for a customer that uses the RAAL...
Speaker No.1159 --- Distortion Tests and Crosso...
Continuing from my previous blog post on Speaker No. 1159 I continue my comparison against a non-horn loaded test baffle. I compare distortion sweeps at high SPL and look at why 1159...
Speaker No.1159 --- Distortion Tests and Crosso...
Continuing from my previous blog post on Speaker No. 1159 I continue my comparison against a non-horn loaded test baffle. I compare distortion sweeps at high SPL and look at why 1159...