News
Speaker No.1159 --- Distortion Tests and Crosso...
Continuing from my previous blog post on Speaker No. 1159 I continue my comparison against a non-horn loaded test baffle. I compare distortion sweeps at high SPL and look at why 1159...
Speaker No.1159 --- Distortion Tests and Crosso...
Continuing from my previous blog post on Speaker No. 1159 I continue my comparison against a non-horn loaded test baffle. I compare distortion sweeps at high SPL and look at why 1159...
Speaker No.1159 --- Horn Loaded 2-way -- Medium...
Introduction I normally focus on horn speakers however I've been wanting to develop a medium sized bookshelf speaker that uses technology from my flagship products. I still wanted the speaker...
Speaker No.1159 --- Horn Loaded 2-way -- Medium...
Introduction I normally focus on horn speakers however I've been wanting to develop a medium sized bookshelf speaker that uses technology from my flagship products. I still wanted the speaker...
Altec 806-8A on Altec 811B Horn
This blog post features a full set of measurements on the Altec 806-8A compression driver mounted to the Altec 811B Horn. For interest's sake please see my other blog posts...
Altec 806-8A on Altec 811B Horn
This blog post features a full set of measurements on the Altec 806-8A compression driver mounted to the Altec 811B Horn. For interest's sake please see my other blog posts...
Altec 806-8A Compression Driver
This blog post features the Altec 806-8A compression driver mounted to the ES-600 Biradial using a 1" throat. I purchased a pair of these drivers used to see how...
Altec 806-8A Compression Driver
This blog post features the Altec 806-8A compression driver mounted to the ES-600 Biradial using a 1" throat. I purchased a pair of these drivers used to see how...
Altec 811B with TAD TD-2001
This blog features a full set of measurement on the Altec 811B biradial horn. My plan was to test this horn with a pair of Altec 806-8A compression drivers however...
Altec 811B with TAD TD-2001
This blog features a full set of measurement on the Altec 811B biradial horn. My plan was to test this horn with a pair of Altec 806-8A compression drivers however...