3D CAD Model for Rear Cover No.2021 for Faital HF1460 Compression Driver

This is the 3D CAD File that I specifically designed for the Faital HF1460 compression driver. 

By purchasing this file you will automatically receive via email the .STL file which allows you to 3D print the rear cover. 

Features 

• Enlarges rear chamber volume compared to stock 
• Lowers FS from 490Hz to 300Hz 
• Cleans up subjective sound quality in the 500Hz-1kHz region 
• Optimized for home audio use where high SPL levels are not required 
• Uses existing mounting screws 
• Simply remove existing cover and install new cover 
• No insulation or stuffing material required or suggested 
• Physically measures 120mm diameter x 70mm deep 
  
• Suggest at least 50% infill for print settings 
• Custom design for rear covers available for other drivers (please contact joseph_crowe@josephcrowe.com)
• Zipped file is automatically emailed to you after ordering. Check your junk/spam folder if you don't see it right away.